GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Holden
🢒
2009
🢒
VE Ute
🢒
Transmission
🢒
Clutch
🢒 Engine Flywheel Replacement
Removal Procedure
Remove the transmission. Refer to one of the following procedures:
•
Transmission Replacement
- Aisin AY6.
•
Transmission Replacement
- 4L60-E/4L65-E/4L70-E.
•
Transmission Replacement
- 5L40-E/5L50-E.
Remove the engine flywheel. Refer to
Engine Flywheel Removal
or
Engine Flywheel Removal
.
Clean and inspect the flywheel. Refer to
Engine Flywheel Cleaning and Inspection
Refer to
Engine Flywheel Cleaning and Inspection
. If the flywheel teeth are damaged, inspect the starter for correct operation. Replace the starter if you find wear or damage to the starter drive above acceptable tolerances. Refer to
Starter Motor Replacement
.
Installation Procedure
Install the engine flywheel. Refer to
Engine Flywheel Installation
.
Install the transmission. Refer to one of the following procedures:
•
Transmission Replacement
.
•
Transmission Replacement
.
•
Transmission Replacement
.