Draining Procedure
Caution: Refer to Protective Goggles and Glove Caution in the Preface section.
Caution: Refer to Vehicle Lifting Caution in the Preface section.
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
- Clean away any dirt and debris from around the transmission
fluid drain plug (3) area.
- Position an appropriate container below the transmission drain plug.
- Remove the transmission fluid drain plug (3) and washer (2) and discard.
Discard the washer.
- Allow the transmission fluid to drain into the container.
- Install a NEW sealing washer (2) to the transmission drain plug.
Notice: Refer to Fastener Notice in the Preface section.
- Install the transmission drain plug (1) to the transmission.
Tighten
Tighten the drain plug to 37 N·m (27 lb ft).
- Remove the container used to catch the used transmission fluid from under
the vehicle.
Filling Procedure
- Clean away any dirt and debris from the transmission
fluid fill plug (1) area.
- Remove the transmission fluid fill plug (1) and washer (2) and discard.
Discard the washer.
- Fill the transmission to just below the bottom of
the fill plug hole with the recommended fluid. Refer to
Lubrication Specifications.
- Install a NEW sealing washer (2) to the transmission
fill plug.
Notice: Refer to Fastener Notice in the Preface section.
- Install the transmission fill plug (1) to the transmission.
Tighten
Tighten the fill plug to 37 N·m (27 lb ft).