Removal Procedure
- Lift the rear window shelf trim battery access panel (1)
upwards to gain access to the battery.
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Remove the battery negative cable to battery terminal retaining nut (2).
Important: Clean any existing corrosion from the battery
negative terminal (1) and the battery negative cable (3).
- Remove the battery negative cable (3) from the battery negative terminal (1).
Installation Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
Important: Clean any existing corrosion from the battery
negative terminal (1) and the battery negative cable (3).
- Install the battery negative cable (3) to the battery negative terminal (1).
Notice: Refer to Fastener Notice in the Preface section.
- Install the battery negative cable to battery negative terminal retaining nut (2).
Tighten
Tighten the nut to 17 N·m (13 lb ft).
- Close the rear window shelf trim battery access panel (1).