GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 VE Ute 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Endgate Weatherstrip Replacement

Removal Procedure

    Object Number: 2008010 Size: SH

    Important: Pull the rear compartment weatherstrip (2) from the rear compartment pinch-weld flange (1).

  1. Remove the rear compartment weatherstrip (2) from the pinch-weld flange (1).
  2. Remove the rear compartment weatherstrip (2) from the vehicle.

Installation Procedure

    Object Number: 2008010 Size: SH
  1. Position the rear compartment weatherstrip (2) over the top of the rear compartment pinch-weld flange (1).

    2. Important: Press the rear compartment weatherstrip (2) onto the rear compartment pinch-weld flange (1) and make sure that the rear compartment weatherstrip (2) is secured correctly to the entire pinch-weld flange (1).

  2. Install the rear compartment weatherstrip (2) to the pinch weld flange (2).