Scan Tool Data List ExceptHolden
The electronic brake control module (EBCM) Scan Tool Data Lists contain all the ABS related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The column, 'Data List,' indicates the location of the parameter within the scan tool menu selections.
Use the EBCM Scan Tool Data Lists as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all the diagnostic procedures with the ABS Diagnostic Starting Point. Use the EBCM Scan Tool Data Lists only after the following is determined:
| • | There is no published DTC procedure nor published symptom procedure for the customer concern. |
| OR |
| • | The DTC or symptom diagnostic procedure indicated by the diagnostic system check does not resolve the customer concern. |
The Typical Data Values are obtained from a properly operating vehicle under the conditions specified in the first row of the Scan Tool Data List table. Comparison of the parameter values from the suspect vehicle with the Typical Data Values may reveal the source of the customer concern.
The ID Information menu is located on the EBCM main screen.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON, Engine OFF, and vehicle is stationary | |||
Battery Voltage | ABS Data | Volts | B+ |
Brake Light Switch | ABS Data | Applied/Released | Released |
Left Front Wheel Speed | ABS Data | mph/km/h | 0 |
Left Rear Wheel Speed | ABS Data | mph/km/h | 0 |
LF Dump Valve Command | ABS Data | On/Off | Off |
LF Dump Valve Feedback | ABS Data | On/Off | Off |
LF Hold Valve Command | ABS Data | On/Off | Off |
LF Hold Valve Feedback | ABS Data | On/Off | Off |
LR Dump Valve Command | ABS Data | On/Off | Off |
LR Dump Valve Feedback | ABS Data | On/Off | Off |
LR Hold Valve Command | ABS Data | On/Off | Off |
LR Hold Valve Feedback | ABS Data | On/Off | Off |
Pump Motor Relay | ABS Data | On/Off | Off |
Right Front Wheel Speed | ABS Data | mph/km/h | 0 |
Right Rear Wheel Speed | ABS Data | mph/km/h | 0 |
RF Dump Valve Command | ABS Data | On/Off | Off |
RF Dump Valve Feedback | ABS Data | On/Off | Off |
RF Hold Valve Command | ABS Data | On/Off | Off |
RF Hold Valve Feedback | ABS Data | On/Off | Off |
RR Dump Valve Command | ABS Data | On/Off | Off |
RR Dump Valve Feedback | ABS Data | On/Off | Off |
RR Hold Valve Command | ABS Data | On/Off | Off |
RR Hold Valve Feedback | ABS Data | On/Off | Off |
TCS Switching Valve 1 Status | TCS Data | Active/Inactive | Inactive |
TCS Switching Valve 2 Status | TCS Data | Active/Inactive | Inactive |
TCS Shut Off Valve 1 Status | TCS Data | Active/Inactive | Inactive |
TCS Shut Off Valve 2 Status | TCS Data | Active/Inactive | Inactive |
Valve Relay State | ABS Data | On/Off | Off |
Scan Tool Data List Holden
The electronic brake control module (EBCM) Scan Tool Data Lists contain all the ABS related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The column, 'Data List,' indicates the location of the parameter within the scan tool menu selections.
Use the EBCM Scan Tool Data Lists as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all the diagnostic procedures with the ABS Diagnostic Starting Point. Use the EBCM Scan Tool Data Lists only after the following is determined:
| • | There is no published DTC procedure nor published symptom procedure for the customer concern. |
| OR |
| • | The DTC or symptom diagnostic procedure indicated by the diagnostic system check does not resolve the customer concern. |
The Typical Data Values are obtained from a properly operating vehicle under the conditions specified in the first row of the Scan Tool Data List table. Comparison of the parameter values from the suspect vehicle with the Typical Data Values may reveal the source of the customer concern.
The ID Information menu is located on the EBCM main screen.
Scan Tool Parameter | System State | Expected Value | Description |
|---|---|---|---|
Engine Idling/Operating Temperature / Closed Throttle / Park or Neutral / Closed Loop / Accessories Off | |||
ABS Active | Yes No | - | The scan tool will display Yes or No depending on the state of the ABS indicator. |
Brake Light Switch | Inactive 0V Active 12V | - | The scan tool displays Inactive and Active. The scan tool displays No when the ignition is ON and the brake pedal is not applied. |
EBD Active (Electronic Brake Distribution) | No Yes | - | The scan tool displays Yes or No. The failed status of the EBD. Indicates if the EBCM disabled EBD due to a malfunction. |
FL Wheel Speed (Front Left) | km/h | - | The scan tool displays the actual speed of each wheel. |
FR Wheel Speed (Front Right) | km/h | - | |
RL Wheel Speed (Rear Left) | km/h | - | |
RR Wheel Speed (Rear Right) | km/h | - | |
System Voltage | V | - | The scan tool displays the voltage measured between the module’s battery positive voltage circuit and ground circuit. |
