Step | Action | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|
Schematic Reference: Door Lock/Indicator Schematics Connector End View Reference: Component Connector End Views | |||||||||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |||||||
2 | Verify that all door locks and switches are inoperative. Do the power door locks operate normally? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 | ||||||
3 | Is the DR/LOCK fuse open? | Go to Step 6 | Go to Step 4 | ||||||
4 | Test the battery positive voltage circuit of the lock switches for an open or high resistance. Did you find and correct the condition? | Go to Step 8 | Go to Step 5 | ||||||
5 | Inspect for poor connections at the Door Lock Relay. Did you find and correct the condition? | Go to Step 8 | Go to Step 7 | ||||||
6 | Repair the short to ground in one of the following circuits:
Did you complete the repair? | Go to Step 8 | -- | ||||||
7 | Replace the Door Lock Relay. Did you complete the replacement? | Go to Step 8 | -- | ||||||
8 | Operate the system in order to verify the repair. Did you find and correct the condition? | System OK | Go to Step 2 | ||||||
