GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Viva 🢒 Body Systems 🢒 Vehicle Access 🢒 Rear Door Lock Replacement

Removal Procedure

    Notice: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1309053 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the door seal trim. Refer to Door Water Deflector Replacement .
  3. Remove the door lock screws.
  4. Disconnect the lock rods.
  5. Remove the door lock.
  6. Disconnect the electrical connector.

Installation Procedure

    Object Number: 1309053 Size: SH
  1. Connect the electrical connector.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the rear door lock with the screws.

    3. Tighten
    Tighten the rear door lock screws to 8 N·m (71 lb in).

  3. Install the lock rods.
  4. Install the door seal trim. Refer to Door Water Deflector Replacement .
  5. Connect the negative battery cable.