GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Viva 🢒 Body Systems 🢒 Vehicle Access 🢒 Rear Compartment Lid Latch Striker Replacement

Removal Procedure

    Object Number: 1309307 Size: SH
  1. Open the rear compartment.
  2. Remove the rear compartment lower cover. Refer to Rear Compartment Trim Panel Replacement .
  3. Remove the bolts securing the lock striker.
  4. Pull the lock striker out.
  5. Disconnect the lock release cable from the lock striker.

Installation Procedure

    Object Number: 1309307 Size: SH
  1. Connect the lock release cable.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the lock striker with the bolts.

    3. Tighten
    Tighten the rear compartment lock striker bolts to 8 N·m (71 lb in).

  3. Install the rear compartment lower cover. Refer to Rear Compartment Trim Panel Replacement .