For 1990-2009 cars only
- Move the shift control lever into the neutral (N) position.
- Loosen the control cable adjusting nut.
- Put the transmission range (TR) switch lever in neutral (N).
- Pull the shift control cable until it is tight and install the control cable adjusting nut and tighten to 8 N·m (71 lb in).
- Install the floor console. Refer to Front Floor Console Replacement.
Note: The various shift control cable positions must match at the shift control lever in the vehicle and at the selector lever on the transaxle to provide proper transaxle shifting.
Caution: Refer to Fastener Caution in the Preface section.
