Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable.
- Pry off the dome lamp lens by inserting a screwdriver into the recess along the edge of the lens.
- Remove the screws and the dome lamp housing from the headliner.
- Disconnect the electrical connector.
- Remove the bulb.
Installation Procedure
- Install a new bulb.
- Connect the electrical connector.
Caution: Refer to Fastener Caution in the Preface section.
- Install the dome lamp housing to the headliner with the screws.
- Press the dome lamp lens onto the housing.
- Connect the negative battery cable.