For 1990-2009 cars only
Removal Procedure
- Remove the caliper mounting bracket.
- Remove the rotor detent screw.
- Remove the rotor.
- Remove the rear ABS sensor connector.
- Remove the hub bolts and hub.
- Remove the upper return spring, lower return spring and adjuster assembly.
- Remove the retaining spring plate, spring and retaining spring pin.
- Remove the parking brake shoe.
- Remove the parking brake cable pin and cable from the backing plate.
Installation Procedure
- Install the parking brake cable to the backing plate and lock the pin.
- Install the retaining spring pin, parking brake shoe, retaining spring and retaining spring plate.
- Install the adjuster assembly, lower return spring and upper return spring.
- Install the hub with bolts and tighten to 65 N·m (48 lb ft).
- Connect the ABS sensor connector.
- Install the rotor with a detent screw and tighten to 4 N·m (35 lb in).
- Install the caliper mounting bracket with bolts and tighten to 56 N·m (41 lb ft).
- Install the wheel.
Caution: Refer to Fastener Caution in the Preface section.
