Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable.
- Disconnect the electrical connector.
- Remove the electrical harness from the rear deck lid hinge arm.
- Remove the bolts and the rear deck lid.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the rear deck lid with the bolts and tighten to
10 N·m (89 lb in).
- Install the electrical harness to the rear deck lid hinge arm.
- Connect the electrical connector.
- Connect the negative battery cable.