GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Viva 🢒 Body Repair 🢒 Bumpers and Fascias 🢒 Front Bumper Impact Bar Replacement

Removal Procedure

    Object Number: 1308620 Size: SH
  1. Disconnect the electrical connector.
  2. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.
  3. Remove the front bumper energy absorber. Refer to Front Bumper Fascia Energy Absorber Replacement.
  4. Remove the bolts and the front bumper impact bar.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1308620 Size: SH
  1. Install the front impact bar with the bolts and tighten to 39 N·m (29 lb ft).
  2. Install the front bumper energy absorber. Refer to Front Bumper Fascia Energy Absorber Replacement.
  3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement.
  4. Connect the electrical connector.