GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Viva 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Shift Control Linkage Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1248177 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the rod clamp. Refer to Shift Linkage Adjustment.
  3. Remove the clip and the bolt from universal joint.
  4. Separate the universal joint from the transaxle.

    5. Object Number: 1248179 Size: SH
  5. Remove the fixing shaft pin and separate the linkage connection part from the transaxle rear mounting bracket.
  6. Remove the shift linkage assembly.

Installation Procedure

    Object Number: 1248179 Size: SH
  1. Install the shift linkage assembly.
  2. Install the fixing shaft pin and connect the linkage connection part to the transaxle rear mounting bracket.

    3. Object Number: 1248177 Size: SH
  3. Install the universal joint to the transaxle.
  4. Install the clip and the bolt from universal joint.
  5. Install the rod clamp. Refer to Shift Linkage Adjustment.
  6. Adjust the shift linkage. Refer to Shift Linkage Adjustment.
  7. Connect the negative battery cable.