GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Holden
🢒
2009
🢒
Viva
🢒
Preface
🢒
Dangers, Warnings, and Cautions
🢒 Front Seat Belt Replacement
Removal Procedure
Remove the plastic cap to reveal the lower center pillar seat belt anchor.
Remove the bolt and the lower center pillar seat belt anchor.
Remove the lower center pillar trim panel. Refer to
Center Pillar Lower Trim Panel Replacement
.
Remove the plastic cap to reveal the upper center pillar seat belt anchor.
Remove the bolt and the upper center pillar seat belt anchor.
Remove the screws from the seat belt retractor bracket.
Remove the bolt and the seat belt retractor.
Installation Procedure
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the seat belt retractor with the bolt and tighten to
38 N·m (28 lb ft)
.
Install the seat belt retractor bracket with the screw and tighten to
3 N·m (27 lb in)
.
Install the upper center pillar seat belt anchor with the bolt and tighten to
38 N·m (28 lb ft)
.
Install the seat belt anchor plastic cap.
Install the lower center pillar trim panel. Refer to
Center Pillar Lower Trim Panel Replacement
.
Install the lower center pillar seat belt anchor with the bolt and tighten to
38 N·m (28 lb ft)
.
Install the seat belt anchor plastic cap.