GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2007 🢒 WM Sedan 🢒 Preface 🢒 Cautions and Notices 🢒 Control Valve Lower Body and Upper Body Replacement

Control Valve Lower Body and Upper Body Replacement SWB LWB RHD


Object Number: 1655115 Size: MF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the transmission fluid pan and filter. Refer to Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement.
  3. Remove the transmission electrical connector. Refer to Automatic Transmission Electrical Connector Passage Sleeve Replacement.

1

Manual Shaft Detent Bolt

Tighten
12 N·m (106 lb. in)

2

Manual Shaft Detent Assembly

3

Control Valve Assembly Bolt (Qty: 6)

    • Do not remove all the bolts in the control valve body assembly. Remove only the bolts indicated.
    • Tighten in specified sequence.

Tighten
8 N·m (71 lb. in)

4

Control Valve Assembly

5

Fluid Pump Seal

Discard seal and replace with new.

6

Fluid Pump Seal

Discard seal and replace with new.

7

Centre Support Fluid Passage Seal

Discard seal and replace with new.