| Table 1: | Instrument Cluster Panel Indicators |
| Table 2: | Driver Information Centre Warning Messages |
Symbol | Description | ||||
|---|---|---|---|---|---|
| |||||
| Air Bag: SIR System Description and Operation | ||||
BRAKE | Brake Warning Lamp: Brake Warning System Description and Operation | ||||
| Alternator or Charging System: Charging System Description and Operation | ||||
| Driver Seat Belt Warning: Seat Belt System Description and Operation | ||||
| Passenger Seat Belt Warning: Seat Belt System Description and Operation | ||||
| Fog Lamps: Exterior Lighting Systems Description and Operation | ||||
| High Beam: Exterior Lighting Systems Description and Operation | ||||
| Daytime Running Lamps: Exterior Lighting Systems Description and Operation | ||||
MPH | The IPC displays the MPH indicator when the IPC detects that English units have been requested by the driver. | ||||
KM/H | The IPC displays the km/h indicator when the IPC detects that Metric units have been requested by the driver. | ||||
| Malfunction Indicator Lamp (MIL):
| ||||
| Turn Signals: Exterior Lighting Systems Description and Operation | ||||
| Security Warning: Content Theft Deterrent (CTD) Description and Operation | ||||
| |||||
| Tire Pressure Monitoring System: Tire Pressure Monitor Description and Operation |
Symbol | Description | ||||
|---|---|---|---|---|---|
ABS FAULT | |||||
BRAKE | |||||
PARK BRAKE | |||||
ALTERNATOR/CHARGING SYSTEM | |||||
CHECK OIL PRESSURE/OIL LEVEL | The low oil pressure/oil level warning occurs when a low engine oil pressure and/or a low engine oil level concern is detected by the ECM. | ||||
ENGINE TEMP (Temperature) HOT | |||||
AIR BAG FAULT | |||||
OVER SPEED | The overspeed warning displays when the BCM detects that the vehicle speed has exceeded the selected value the driver had preset. The IPC then displays the overspeed warning on the DIC. The general warning chime sounds when active. | ||||
STABILITY CONTROL ASSISTANCE/STABILITY CONTROL OFF | |||||
LOW FUEL | The low fuel message displays when the IPC determines that the fuel level is less than 12 percent. | ||||
VERY LOW FUEL | The very low fuel message displays when the IPC determines that the fuel level is less than 0 percent. This occurs when the fuel level in the tank is lower than the minimum level the sender can read. The IPC receives a message indicating the fuel level from the ECM and displays the very low fuel message on the DIC. | ||||
SPORT SHIFT | The sport shift message displays when the BCM detects that the shifter assembly has been moved to enable sport shift mode. The BCM sends this information to the IPC via a serial data message. | ||||
NORMAL SHIFT | The normal shift message displays when the BCM detects that the shifter assembly has been returned to D. The BCM sends this information to the IPC via a serial data message. | ||||
SERVICE | The service error message displays when an IPC concern usually relating to a loss of communications is present. | ||||
SERVICE CHARGING SYSTEM | |||||
REPLACE BATTERY IN REMOTE KEY | |||||
CHECK ENGINE |
| ||||
SAFETY MODE ACTIVE AND POWER REDUCED | |||||
SERVICE VEHICLE SOON | The service vehicle soon message displays when a non emissions related concern is detected by the BCM. The IPC displays the service vehicle soon message on the DIC. The general warning chime sounds when the warning is active. | ||||
SERVICE ENGINE OIL | This message displays when the ECM determines that the engine oil life is below 5 percent. The ECM sends the information to the IPC via a serial data message. After the oil is changed, reset the engine oil monitor. | ||||
CRUISE CONTROL ON/ACTIVE/INACTIVE/OFF | |||||
ENGINE IMMOBILISED | Refer to the Owner's Manual | ||||
BATTERY SAVER MODE ON | |||||
REST REMINDER | The rest reminder message displays after two hours of continuous driving. When the ignition is switched to the ON position, a timer in the IPC starts counting. After two hours of continuous driving, the IPC displays the rest reminder message on the DIC. | ||||
TIRE PRESSURE SYSTEM FAULT |
