GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 WM Sedan 🢒 Preface 🢒 Cautions and Notices 🢒 Rear Bumper Fascia Reflector Replacement

Removal Procedure
  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement.

    2. Object Number: 1937411 Size: SH
  2. Remove the rear bumper fascia reflector retaining screw (1) from behind the rear bumper fascia (2)
  3. Slide the rear bumper fascia reflector towards the centre of the rear bumper fascia.
  4. Remove the rear bumper fascia reflector from the rear bumper fascia.

Installation Procedure

    Object Number: 1937411 Size: SH
  1. Install the rear bumper fascia reflector by sliding into position in the rear bumper fascia (2).
  2. Install the rear bumper fascia reflector retaining screw (1).

    3. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement.