Removal Procedure
- Remove the rear seat cushion. Refer to
Rear Seat Cushion Replacement.
- Remove the retaining torx screw (1) from the rear
sill panel trim.
- Remove the retaining pin (2) and remove the rear sill panel trim by pulling
from the lower edge and disengaging the retaining clips.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the rear sill panel trim.
- Install the rear sill panel trim retaining torx screw (1).
Tighten
Tighten the torx screw (1) to 2.0 N·m
(18 lb in).
- Install the rear sill panel trim retaining pin (2).
- Install the rear seat cushion. Refer to
Rear Seat Cushion Replacement.