GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Holden
🢒
2009
🢒
WM Sedan
🢒 ECM Power, Ground and Serial Data
ECM Power, Ground and Serial Data
ECM Power, Ground and Serial Data
Master Electrical Component List
Engine Control Module Description
Control Module References
5 Volt Reference and Low Reference
B+ Bus - 2 of 2
B+ Bus - 2 of 2
ECM, Fuel Pump, Rear Main, RVC Sense and Trailer Fuses
Batt Main 2, Console Lighting, BCM Logic, Stop Lamps/Park Assist and IGNSW/Theft Fuses and Ignition Switch
PWR/TRN Bus - ECM 1, Emission 1 and REV/LOCK Fuses
IGN II/III Bus - Airbag, IGN Engine and Phone/Cruise
Batt Main 2, Console Lighting, BCM Logic, Stop Lamps/Park Assist and IGNSW/Theft Fuses and Ignition Switch
IGN II/III Bus - Airbag, IGN Engine and Phone/Cruise
ECM, Fuel Pump, Rear Main, RVC Sense and Trailer Fuses
Batt Main 2, Console Lighting, BCM Logic, Stop Lamps/Park Assist and IGNSW/Theft Fuses and Ignition Switch
G102 and G310
G102 and G310
Cooling Fans and Relays
Camshaft Position Sensor, MAP Sensor, Reverse Lockout Solenoid, EVAP Canister Purge Solenoid, Coolant Temp Sensor, MAF Sensor, Oil Level and Temp Sensor and Backup Lamp Switch
TCM and Transmission, Power, Ground, Serial Data, Inputs and Outputs
Pin Allocation
G102 and G310
G103, G110, G111 and G112 (6.0L)
G103, G106, G107, G108 and G109 (3.6L)
Engine Controls Schematic Icons
Batt Main 2, Console Lighting, BCM Logic, Stop Lamps/Park Assist and IGNSW/Theft Fuses and Ignition Switch
Instrument Cluster Power, Ground, Serial Data, Inputs and Outputs