• | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
• | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
• | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
The electronic brake control module (EBCM) receives CAN message inputs from the steering wheel position sensor identifying the position and direction of the steering wheel rotation.
• | Ignition ON. |
• | Ignition voltage is greater than 10 volts. |
The EBCM detects an internal steering angle sensor failure.
Steering angle sensor not calibrated.
• | The EBCM disables the ABS/traction control system (TCS)/vehicle stability enhancement system (VSES) for the duration of the ignition cycle. |
• | A DIC message and/or a warning indicator may be displayed. |
• | The condition for setting the DTC is no longer present. |
• | The EBCM clears the history DTC when a current DTC is not detected in 100 consecutive drive cycles. |
Antilock Brake System Schematics
Control Module References for scan tool information
⇒ | If any of the DTCs are set refer to Diagnostic Trouble Code (DTC) List - Vehicle. |
Verify that DTC C0460 42 is not set.
⇒ | If the DTC is set perform the Steering Angle Sensor Centering. |
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.