GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2003 🢒 Ascender - 2WD 🢒 Restraints 🢒 Seat Belts 🢒 Seat Belt Side Buckle Replacement - Rear

Removal Procedure

    Object Number: 828140 Size: SH
  1. Remove the 3 screws securing the inboard rear seat back hinge cover.

    2. Object Number: 831437 Size: SH
  2. Remove the seat belt side buckle nut (2).
  3. Remove the seat belt side buckle (1) from the seat.

Installation Procedure

    Object Number: 831437 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the seat belt side buckle (1) to the seat with the seat belt anchor nut (2).

    2. Tighten
    Tighten the seat belt side buckle nut to 55N·m (40 lb ft).


    Object Number: 828140 Size: SH
  2. Install the inboard rear seat back cushion latch cover with 3 screws.

    3. Tighten
    Tighten the rear seat back cushion latch cover screws to 2N·m (18 lb in).