GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2003 🢒 Ascender - 2WD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Front Fog Lamp Replacement

Removal Procedure
  1. Remove the fog lamp bulb and socket. Refer to Front Fog Lamp Bulb Replacement .

    2. Object Number: 742553 Size: SH
  2. Remove the 3 nuts that retain the fog lamp to the fascia (2).
  3. Remove the fog lamp from the fascia.

Installation Procedure

    Object Number: 742553 Size: SH
  1. Install the fog lamp to the fascia (2).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the 3 fog lamp retaining nuts.

    3. Tighten
    Tighten the nuts to 10.0 N·m (88 lb in).

  3. Install the fog lamp bulb and socket. Refer to Front Fog Lamp Bulb Replacement .
  4. Aim the fog lamp(s). Refer to Fog Lamp Aiming .