GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2003 🢒 Ascender - 2WD 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Switch Replacement

Removal Procedure

    Object Number: 689850 Size: SH
  1. Using a flat-bladed tool, remove the window switch bezel from the door trim panel.
  2. Disconnect the electrical connector from the window switch.
  3. Release the retaining clips that attach the power window switch to the bezel.
  4. Remove the switch from the bezel.

Installation Procedure

    Object Number: 689850 Size: SH
  1. Install the switch to the bezel. Ensure that the retainers are fully seated.
  2. Connect the electrical connector to the window switch.
  3. Install the window switch bezel to the door trim panel.
  4. Ensure that the window switch bezel retaining clips are fully seated.