GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2003 🢒 Ascender - 2WD 🢒 Body and Accessories 🢒 Doors 🢒 Front Side Door Replacement

Removal Procedure
  1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling in SIR.
  2. Remove the accessory switch panel. Refer to Door Lock and Side Window Switch Replacement - Driver Side .
  3. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  4. Remove the outer belt sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement .
  5. Remove the inside door handle. Refer to Door Inside Handle Replacement .
  6. Remove the speaker. Refer to Radio Front Side Door Speaker Replacement in Entertainment.
  7. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
  8. Remove the outside rear view mirror (ORVM). Refer to Outside Rearview Mirror Replacement .
  9. Remove the window. Refer to Front Side Door Window Replacement .
  10. Remove the weatherstrip run channel. Refer to Front Side Door Window Channel Replacement .
  11. Remove the window regulator. Refer to Front Side Door Window Regulator Replacement .
  12. Remove the door latch assembly. Refer to Front Side Door Latch Replacement .
  13. Remove the side door SIR sensor. Refer to Inflatable Restraint Side Impact Sensor Replacement in SIR.
  14. Remove the outside door handle. Refer to Front Side Door Outside Handle Replacement .
  15. Remove the check link. Refer to Door Check Link Replacement .
  16. Remove the wire harness from the door. Refer to Front Side Door Wiring Harness Replacement .

    17. Object Number: 723025 Size: SH
  17. Remove the bolts that retain the door to the hinge plates.
  18. Remove the door from the vehicle with an assistant.

Installation Procedure

    Object Number: 723025 Size: SH
  1. Install the door to the vehicle with an assistant.
  2. Apply LOCTITE Blue or equivalent to the fastener prior to installation.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the bolts that retain the door to the hinge plates.

    4. Tighten
    Tighten the bolts to 15 N·m (11 lb ft).

  4. Install the wire harness to the door. Refer to Front Side Door Wiring Harness Replacement .
  5. Install the check link. Refer to Door Check Link Replacement .
  6. Install the outside door handle. Refer to Front Side Door Outside Handle Replacement .
  7. Install the side door SIR sensor. Refer to Inflatable Restraint Side Impact Sensor Replacement in SIR.
  8. Install the door latch assembly. Refer to Front Side Door Latch Replacement .
  9. Install the window regulator. Refer to Front Side Door Window Regulator Replacement .
  10. Install the weatherstrip run channel. Refer to Front Side Door Window Channel Replacement .
  11. Install the window. Refer to Front Side Door Window Replacement .
  12. Install the ORVM. Refer to Outside Rearview Mirror Replacement .
  13. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  14. Install the speaker. Refer to Radio Front Side Door Speaker Replacement in Entertainment.
  15. Install the inside door handle. Refer to Door Inside Handle Replacement .
  16. Install the outer belt sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement .
  17. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  18. Install the accessory switch panel. Refer to Door Lock and Side Window Switch Replacement - Driver Side .
  19. Enable the SIR. Refer to SIR Disabling and Enabling in SIR.