GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2003 🢒 Ascender - 2WD 🢒 Body and Accessories 🢒 Seats 🢒 Rear Seat Mid-Position Floor Latch Assembly Replacement

Removal Procedure
  1. Remove the seat from the vehicle. Refer to Rear Seat Replacement .
  2. Remove the trim panel from the seat cushion. Refer to Rear Seat Cushion Trim Panel Replacement .
  3. Remove the rear center seat belt buckle assembly from the floor latch assembly. Refer to Rear Seat Center Belt Buckle Replacement in Restraints.

    4. Object Number: 828232 Size: SH
  4. Remove the cable (3) from the mid-position floor latch assembly (2).
  5. Remove the bolts (1) securing the mid-position floor latch assembly to the seat cushion frame.
  6. Remove the mid-position floor latch assembly.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 828232 Size: SH
  1. Install the mid-position floor latch assembly to the seat cushion frame with the bolts (1).

    2. Tighten
    Tighten the rear seat mid-position floor latch assembly bolts to 35 N·m (26 lb ft).

  2. Install the cable (3) to the mid-position floor latch assembly (2).
  3. Install the rear center seat belt buckle assembly to the floor latch assembly. Refer to Rear Seat Center Belt Buckle Replacement in Restraints.
  4. Install the trim panel to the seat cushion. Refer to Rear Seat Cushion Trim Panel Replacement .
  5. Install the seat in the vehicle. Refer to Rear Seat Replacement .