GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2003 🢒 Ascender - 2WD 🢒 Preface 🢒 Cautions and Notices 🢒 Driver or Passenger Seat Back Cushion Finish Panel Replacement

Removal Procedure

    Object Number: 753524 Size: SH
  1. Remove the front bucket seat assembly from the vehicle. Refer to Front Seat Replacement - Bucket .
  2. Remove the front seat back cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
  3. Remove the lumbar cables from the panel clips.

    4. Object Number: 753491 Size: SH
  4. Remove the 2 push-pin fasteners (1) from each side of the panel.

    5. Object Number: 784461 Size: SH
  5. Remove the push-pin fastener (1) from the bottom of the panel.

    6. Object Number: 753523 Size: SH
  6. Remove the panel from the top of the seat-back frame.
  7. Remove the seat-back frame.

Installation Procedure

    Object Number: 753523 Size: SH
  1. Install the seat back over the top of the seat-back frame.

    2. Object Number: 753491 Size: SH
  2. Install the panel to the seat-back frame with 2 push-pin fasteners (1) to each side of the panel.

    3. Object Number: 784461 Size: SH
  3. Install the push-pin fastener (1) to the bottom of the panel.

    4. Object Number: 753524 Size: SH
  4. Install the lumbar cables to the panel clips.
  5. Install the front seat back cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
  6. Install the front bucket seat assembly to the vehicle. Refer to Front Seat Replacement - Bucket .