GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2003 🢒 Ascender - 2WD 🢒 General Information 🢒 Maintenance and Lubrication 🢒 Windshield Wiper Blade Replacement

Removal Procedure

    Object Number: 429887 Size: SH

    Important: Do not allow the wiper arm to fall back and strike the windshield.

  1. Lift the wiper arm until it locks in the vertical position.
  2. Push in the locking tab of the wiper blade clip and pull downward on the wiper arm blade.

    3. Object Number: 497492 Size: SH
  3. Remove the wiper blade from the inside radius of the wiper arm.
  4. Bring the wiper arm out through the opening in the wiper blade.

Installation Procedure

    Object Number: 497492 Size: SH
  1. Insert the hook of the wiper arm through the opening in the wiper blade.
  2. Position the wiper blade in the inside radius of the wiper arm hook.

    3. Object Number: 429890 Size: SH
  3. Pull upward until the locking tab of the pivot engages the slot in the hook.
  4. Carefully lower the wiper arm and blade onto the windshield.