GM Service Manual Online
For 1990-2009 cars only

Securing a Child Restraint in the Right Front Seat Position for Isuzu Ascender - 2WD 2003


Object Number: 881825  Size: B3

If your child restraint is equipped with the LATCH system, see Lower Anchors and Tethers for Children (LATCH) .

Your vehicle has a right front passenger air bag. Never put a rear facing child restraint in this seat. Here's why:

Caution: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger's airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. Always secure a rear-facing child restraint in a rear seat.

Although a rear seat is a safer place, you can secure a forward-facing child restraint in the right front seat.

You'll be using the lap-shoulder belt. See Top Strap if the child restraint has one. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say.

  1. Because your vehicle has a right front passenger's air bag, always move the seat as far back as it will go before securing a forward-facing child restraint. See Power Seats or Manual Seats .
  2. Put the restraint on the seat.
  3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how.

  4. Object Number: 805964  Size: B4
  5. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.

  6. Object Number: 805891  Size: B4
  7. Pull the rest of the shoulder belt all the way out of the retractor to set the lock.

  8. Object Number: 805894  Size: B4
  9. To tighten the belt, feed the shoulder belt back into the retractor while you push down on the child restraint. You may find it helpful to use your knee to push down on the child restraint as you tighten the belt.
  10. Push and pull the child restraint in different directions to be sure it is secure.

To remove the child restraint, just unbuckle the vehicle's safety belt and let it go back all the way. The safety belt will move freely again and be ready to work for an adult or larger child passenger.