ATC Application: This parameter displays the model
number assigned to the transfer case. The scan tool displays a numeric value.
ATC Slip Speed: This parameter displays the RPM difference between
the front and rear propshafts. The scan tool displays a range of 0-8,192 RPM.
Battery Voltage: This parameter displays the voltage measured
by the transfer case shift control module at the transfer case shift control module
battery feed. The scan tool displays a range of 0-25.5 volts.
Clutch Pedal Engaged: This parameter displays On when the clutch
pedal is depressed. The scan tool displays On or Off.
Current Slip Adapts: This parameter displays corrective
adjustments made by the transfer case shift control module for wheel slip events.
The scan tool displays a numeric value.
Encoder Gear Position: This parameter displays the mode the
transfer case is currently in.
Encoder Return Voltage: This parameter displays the voltage
measured by the transfer case shift control module at the encoder signal return. The
scan tool displays a range of 0-7.5 volts.
Encoder Supply Voltage : This parameter indicates the voltage
measured by the transfer case shift control module at the encoder power supply. The
scan tool displays a range of 0-7.5 volts.
Front Propshaft Speed: This parameter displays the
rotational speed of the front propshaft. The scan tool displays a range of 0-8,192
RPM.
Ing. Cycles Since Last Current DTC: This parameter displays
how many ignition cycles have occurred since last current DTC was set. The scan tool
displays a numeric value.
Rear Propshaft Speed: This parameter displays the rotational
speed of the rear propshaft. The scan tool displays a range of 0-8,192 RPM.
Service 4WD Lamp: This parameter displays On if the transfer
case shift control module commands the Service 4WD lamp, or message, On. The scan
tool displays On or Off.
Slip Adapt PWM: This parameter displays the duty cycle applied
to the transfer case encoder motor. The scan tool displays a range of 0-100 percent.
Total Slippage: This parameter displays the total slippage of
both the front and rear propshafts. The scan tool displays a range of 0-8,192 RPM.