GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Ascender - 2WD 🢒 Body 🢒 Doors 🢒 Outside Rearview Mirror Replacement

Removal Procedure
  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the outside rear view mirror (ORVM) harness from the door.

    3. Object Number: 763318 Size: SH
  3. Remove the side door insulator.

    4. Object Number: 714015 Size: SH
  4. Remove the 3 ORVM retaining bolts.
  5. Release the clip that retains the ORVM to the door.
  6. Remove the ORVM assembly from the door.

Installation Procedure

    Object Number: 714015 Size: SH
  1. Install the ORVM assembly to the door. Ensure that the retaining clip is fully seated.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the 3 ORVM retaining bolts.

    3. Tighten
    Tighten the bolts to 10 N·m (88 lb in).


    Object Number: 763318 Size: SH
  3. Install the side door insulator.
  4. Install the ORVM harness to the door.
  5. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .