GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Ascender - 2WD 🢒 Body 🢒 Lighting Systems 🢒 Endgate Inner Panel Reinforcement Replacement

Removal Procedure

    Object Number: 902558 Size: SH
  1. Remove the endgate inner trim panel. Refer to Endgate Trim Panel Replacement .
  2. Remove the endgate control module. Refer to Rear Body Control Module Replacement - Endgate .
  3. Remove the bolts retaining the endgate inner reinforcement panel to the endgate.
  4. Remove the inner reinforcement panel from the vehicle.

Installation Procedure

    Object Number: 902558 Size: SH
  1. Install the endgate inner reinforcement panel to the endgate.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the bolts retaining the inner reinforcement panel to the endgate.

    3. Tighten
    Tighten the inner reinforcement bolts to 25 N·m (18.4 lb ft).

  3. Install the endgate control module. Refer to Rear Body Control Module Replacement - Endgate .
  4. Install the endgate inner trim panel. Refer to Endgate Trim Panel Replacement .