GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2005 🢒 Ascender - 2WD 🢒 Steering 🢒 Power Steering System 🢒 Power Steering Pump Shaft Seal Replacement

Power Steering Pump Shaft Seal Replacement CB

Removal Procedure
  1. Remove the power steering pump from the vehicle, if necessary. Refer to Power Steering Pump Replacement .

    2. Object Number: 1555835 Size: SH

    Important: Protect the drive shaft with the shim stock.

  2. Use a small chisel in order to remove the seal.

    3. Discard the seal.

Installation Procedure
  1. Lubricate the new drive shaft seal using power steering fluid.

    2. Object Number: 1555838 Size: SH
  2. Use a deep socket in order to install the new drive shaft seal.
  3. Install the power steering pump, if removed. Refer to Power Steering Pump Replacement .