For 1990-2009 cars only
Removal Procedure
- Install 3/8 inch breaker bar on the drivebelt tensioner arm and turn the breaker bar clockwise enough to relieve the tension on the drivebelt.
- Remove the drivebelt.
- Release the tension on the tensioner arm.
Installation Procedure
- Route the drivebelt over all the pulleys except the drivebelt tensioner pulley.
- Install the 3/8 inch breaker bar on the drivebelt tensioner arm and turn the breaker bar clockwise.
- Install the drivebelt over the drivebelt tensioner pulley.
- Slowly release the tension to the drivebelt tensioner arm.
- Inspect for proper installation of the drivebelt on the pulleys.
