8-Digit GM Part Number: The scan tool displays the 8-digit part number of the module selected.

Base Model Part Number: The scan tool displays the 8-digit base part number of the liftgate module.

Battery Voltage: The scan tool displays 9-15 volts. The state of the battery voltage supplied to the module selected.

Boot S/W Part No.: The scan tool displays the 8-digit boot software part number of the liftgate module.

Boot S/W Suffix: The scan tool displays the 2-digit suffix number of the liftgate module boot software.

Calibration S/W Part No.: The scan tool displays the 8-digit calibration software part number of the liftgate module.

Calibration S/W Suffix: The scan tool displays the 2-digit suffix number of the liftgate module calibration software.

Ign. Since Current DTC: The scan tool displays Cycles. The number of ignition switch cycles since the last DTC was set.

Julian Date of Build: The scan tool displays the 4-digit date of the module selected build.

Liftgate Ajar Switch: The scan tool displays Closed/Ajar. The liftgate ajar switch input to the LGM, where an open liftgate is displayed as Ajar.

Liftglass Ajar Switch: The scan tool displays Closed/Ajar. The liftglass ajar switch input to the LGM, where an open liftglass is displayed as Ajar.

Lock Command: The scan tool displays the LGM output state to the lock actuator as Idle/Unlock/Lock.

Operational S/W Part No.: The scan tool displays the 8-digit operational software part number of the liftgate module.

Operational S/W Suffix: The scan tool displays the 2-digit suffix number of the liftgate module operational software.

Requested Lock/Unlock: The scan tool displays the Lock/Unlock input to the LGM.

Year Module Built: The scan tool displays the 4-digit date of the year the module selected was built.