GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2006 🢒 Ascender - 2WD 🢒 Body 🢒 Seats 🢒 Rear Number 2 Seat Replacement

Removal Procedure

    Object Number: 828139 Size: SH
  1. Remove the three nuts securing the seat assembly to the vehicle.
  2. Remove the seat belt anchors from the floor studs.
  3. Remove the three seat mounting bolts.
  4. Remove the seat assembly from the vehicle.

Installation Procedure

    Object Number: 828139 Size: SH
  1. Install the seat assembly onto the floor studs in the vehicle.
  2. Install the two seat belt anchors onto the floor studs.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the three seat mounting nuts.

    4. Tighten
    Tighten the rear seat mounting nuts to 45 N·m (33 lb ft).

  4. Install the three seat mounting bolts.

    5. Tighten
    Tighten the rear seat mounting bolts to 45 N·m (33 lb ft).