GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2006 🢒 Ascender - 2WD 🢒 Body 🢒 Seats 🢒 Rear Seat Number 2 Pull Handle Replacement

Removal Procedure

    Object Number: 824148 Size: SH
  1. Remove the two screws (3) securing the seat pull handle (1) to the seat panel.
  2. Remove the seat pull handle.

Installation Procedure

    Object Number: 824148 Size: SH
  1. Position the seat pull handle (1) on the seat panel.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the two screws (3) to the seat pull handle (1).

    3. Tighten
    Tighten the rear seat pull handle screws to 4 N·m (36 lb in).