GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2006 🢒 Ascender - 2WD 🢒 Accessories 🢒 Garage Door Opener 🢒 Personal Message Player/Recorder Replacement

Removal Procedure
  1. Remove the overhead console. Refer to Roof Console Replacement in Interior Trim.

    2. Object Number: 741631 Size: SH
  2. Disconnect the electrical connector from the personal message recorder (1).
  3. Remove the personal message recorder retaining screws.
  4. Remove the personal message recorder from the overhead console.
  5. Remove the button assembly from the overhead console.

Installation Procedure

    Object Number: 754989 Size: SH
  1. Install the button assembly to the overhead console.
  2. Install the personal message recorder to the overhead console ensuring the light indicator is fully recessed into the opening (1).

    3. Object Number: 741631 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws that retain the personal message recorder to the overhead console.

    4. Tighten
    Tighten the screws to 0.8 N·m (7 lb in).

  4. Connect the electrical connector to the personal message recorder (1).
  5. Install the overhead console. Refer to Roof Console Replacement in Interior Trim.