GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2006 🢒 Ascender - 2WD 🢒 Steering 🢒 Steering Wheel and Column 🢒 Steering Shaft Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.


    Object Number: 667564 Size: SH
  1. Disable the SIR system. Refer to SIR Disabling and Enabling in SIR.
  2. Remove the steering column tilt head. Refer to Steering Column Tilt Head Housing Replacement .
  3. Remove the steering shaft (1) from the steering column tilt head assembly.
  4. Inspect the steering column for accident damage. Refer to Steering Column Accident Damage Inspection .

Installation Procedure

    Object Number: 667564 Size: SH
  1. Install the steering shaft (1) into the steering column tilt head assembly.
  2. Install the steering column tilt head. Refer to Steering Column Tilt Head Housing Replacement .
  3. Enable the SIR system. Refer to SIR Disabling and Enabling in SIR.