GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 718025  Size: SH
  1. Remove the trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .

  2. Object Number: 718026  Size: SH

    Important: Ensure that the speaker electrical connector does not fall into the speaker opening.

  3. Remove the 3 screws that retain the speaker to the instrument panel (I/P) substrate.
  4. Disconnect the speaker electrical connector.
  5. Remove the speaker from the I/P.

Installation Procedure


    Object Number: 718026  Size: SH
  1. Install the speaker to the I/P.
  2. Connect the speaker electrical connector.
  3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the 3 speaker retaining screws.
  5. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 718025  Size: SH
  6. Install the trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .