GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2007 🢒 Ascender - 2WD 🢒 Driver Information and Entertainment 🢒 Cellular, Entertainment, and Navigation 🢒 Digital Radio Antenna Cable Replacement

Removal Procedure
  1. Remove the right windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .
  2. Remove the instrument panel (I/P) trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .
  3. Remove the right sunshade and inboard retaining clip. Refer to Sunshade Replacement .
  4. Lower the front portion of the headliner. Refer to Headlining Trim Panel Replacement .
  5. Disconnect the electrical connectors from the digital radio antenna assembly. Refer to Digital Radio Antenna Replacement .
  6. Remove the right front door sill plate. Refer to Front Side Door Sill Plate Replacement .

    7. Object Number: 1236116 Size: SH
  7. Remove the coaxial cable from the right windshield pillar (1).
  8. Lower the right closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  9. Disconnect the coaxial cable from the digital radio receiver.

    10. Object Number: 1237263 Size: SH
  10. Remove the lower rose bud (2) from the cowl.
  11. Securely attach a mechanics wire to the end of the coaxial cable (3).
  12. The coaxial cable is routed through the cowl insulator access hole and positioned between the cowl and the I/P. In order to release the upper rose bud (1), grasp the coaxial cable near the bottom of the windshield and carefully pull upward.
  13. Leaving the mechanics wire routed behind the I/P, remove the mechanics wire from the coaxial cable.
  14. Remove the coaxial cable from the vehicle.

Installation Procedure

    Object Number: 1237263 Size: SH
  1. Securely attach the mechanics wire already routed behind the I/P to the end of the coaxial cable (3).
  2. If equipped, carefully remove the rose bud (1) from the coaxial cable.
  3. Grasp and gently pull the mechanics wire through the cowl insulator, routing the coaxial cable behind the I/P.
  4. Attach the lower rose bud (2) to the cowl.

    5. Object Number: 1236116 Size: SH
  5. Connect the coaxial cable to the digital radio receiver.
  6. Attach the coaxial cable to the right windshield pillar (1).
  7. Install the right front door sill plate. Refer to Front Side Door Sill Plate Replacement .
  8. Install the right closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  9. Connect the electrical connectors to the digital radio antenna assembly. Refer to Digital Radio Antenna Replacement .
  10. Install the headliner. Refer to Headlining Trim Panel Replacement .
  11. Install the right sunshade and inboard retaining clip. Refer to Sunshade Replacement .
  12. Install the I/P trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .
  13. Install the right windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .