Preliminary Procedure

Remove the seat. Refer to Front Seat Replacement - Bucket .

1

Yaw Rate Sensor Nut (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

2

Yaw Rate Sensor Electrical Connector

3

Yaw Rate Sensor Sensor

Procedure

1. Disconnect the electrical connector.
2. After the installation is complete, reset the yaw rate sensor using the following procedure:

•	Install a scan tool.

•	Using the special functions menu on the scan tool, reset the yaw rate sensor.