GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2007 🢒 Ascender - 2WD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rear Floor Trim Panel Trim Cover Replacement

Removal Procedure

    Object Number: 1381742 Size: SH
  1. Lower the midgate.
  2. Fold the hinged midgate filler trim panel (2) back.
  3. Release the trim cover retaining clips (1) from the sheet metal.

    4. Object Number: 1236701 Size: SH
  4. Raise the midgate to the closed position.
  5. Remove the rear floor trim panel by grasping and pulling straight out to release the retaining clips.
  6. Remove the rear floor trim panel from the vehicle

Installation Procedure
  1. Raise the midgate to the closed position.

    2. Object Number: 1236701 Size: SH
  2. Ensure that the retaining clips are securely installed on the back side of the rear floor trim panel.
  3. Install the rear floor trim panel by pressing the retaining clips into the sheet metal openings.