To replace one of these bulbs:

1. Open the hood. Hood Release for more information.
2. Lift the two headlamp retaining clips.



3. Pull the headlamp assembly away from the vehicle to access the electrical connectors. The following lamps will be shown.



4. For the high-beam (A) or low-beam (D) bulb replacement, remove the circular bulb cover.
5. Remove the bulb socket that needs to be replaced by turning it counterclockwise.
6. Disconnect the electrical connector from the old bulb.
7. Plug the electrical connector into the new bulb using care not to touch the glass with your fingers.
8. Install the new bulb socket and turn it clockwise to secure.
9. Reinstall by reversing Steps 1 through 4.
10. Press down on the headlamp retaining clips to secure the headlamp assembly.