To change a stoplamp/taillamp, turn signal lamp, or back-up lamp bulb:

1. Open the liftgate. See Liftgate/Liftglass for more information.




Remove the two screws from the taillamp assembly.

2. Pull the taillamp assembly away from the vehicle. The following lamps will be shown:




Stoplamp/Taillamp

Turn Signal Lamp

Back-Up Lamp

3. Turn the bulb socket counterclockwise to remove it from the taillamp assembly.
4. Holding the socket, pull the old bulb straight out to release it from the socket.
5. Push the new bulb into the socket until it clicks. The back-up bulb will not click.
6. Insert the socket into the taillamp assembly and turn the socket clockwise to secure.
7. Reinstall the taillamp assembly by lining up the locator pins with the retainers in he vehicle's body.
8. Reinstall the two screws and tighten.
9. Close the liftgate.