Special Tools

J 42738 Seal Installer

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the transfer case assembly. Refer to Transfer Case Assembly Replacement.

Caution: Refer to Fastener Caution in the Preface section.

Caution: Do not damage the sealing surfaces of the transfer cases or the shafts when prying the seals for removal. Damaging the sealing surface may cause leakage or require replacement of the damaged component.

3. Insert a flat-bladed screw driver between the input shaft seal and the transfer case.



4. Pry the front input shaft seal from the transfer case.
5. Remove the front input shaft seal.

1. Align the input shaft seal on the input shaft.
2. Using the J 42738 , install the input shaft seal.
3. Install the transfer case assembly. Refer to Transfer Case Assembly Replacement.
4. Inspect the transfer case fluid level. Refer to Transfer Case Fluid Replacement.
5. Lower the vehicle.