GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 Ascender - 2WD 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Liftgate Applique Replacement

Removal Procedure

    Object Number: 721368 Size: SH
  1. Open the liftgate window.
  2. Remove the screws that retain the liftgate applique.
  3. Close the liftgate window.

    4. Note: Do not open the liftgate with the liftgate glass open.

  4. Close the liftgate window and open the liftgate.
  5. Remove the liftgate applique from the liftgate pinch-weld flange.

Installation Procedure

    Object Number: 721368 Size: SH
  1. Install the liftgate applique to the liftgate pinch-weld flange. Ensure that the liftgate applique is fully seated.
  2. Close the liftgate and open the liftgate window.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the screws that retain the liftgate applique to the body.

    4. Tighten
    Tighten the liftgate applique screws to 5 N·m (44 lb in).

  4. Close the liftgate window.