GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 Ascender - 2WD 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Roof Console Retainer Replacement

Removal Procedure
  1. Lower the headliner. Refer to Headlining Trim Panel Replacement.

    2. Object Number: 754986 Size: SH
  2. Remove the 4 screws securing the console retainer to the Z clips.
  3. Remove the roof retainer from the vehicle.
  4. If replacing the roof retainer, remove the Z clips from the roof panel.

Installation Procedure

    Object Number: 754986 Size: SH
  1. If replacing the roof retainer, install the roof retainer the roof panel ensuring the Z clips are fully seated.
  2. If installing the existing roof retainer, position the roof retainer to the roof panel.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Partially install the 4 screws retaining the roof retainer to the Z clips.

    4. Tighten
    Tighten the roof retainer attachment screws to 1.2 N·m (10 lb in).

  4. Install the headliner. Refer to Headlining Trim Panel Replacement.