GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 Ascender - 2WD 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Garage Door Opener Transmitter Replacement

Removal Procedure

    Object Number: 741633 Size: SH
  1. Remove the overhead console. Refer to Roof Console Replacement.
  2. Disconnect the electrical connector from the garage door opener (3).
  3. Remove the 3 retaining screws from the garage door opener.
  4. Remove the garage door opener from the overhead console.
  5. Remove the button assembly from the overhead console.

Installation Procedure

    Object Number: 754989 Size: SH
  1. Install the button assembly to the overhead console.
  2. Install the garage door opener to the overhead console. Fully recess the light indicator into the opening (1).

    3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 741633 Size: SH
  3. Install the 3 retaining screws to the garage door opener.

    4. Tighten
    Tighten the screws to 0.8 N·m (7 lb in).

  4. Connect the electrical connector to the garage door opener (3).
  5. Install the overhead console. Refer to Roof Console Replacement.