GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 341650  Size: SH
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Drain the rear axle. Refer to Front Axle Lubricant Replacement .
  3. Remove the rear axle housing cover bolts (1).
  4. Important: Do not nick or cut the rear axle housing cover gasket.

  5. Remove the rear axle housing cover (2) from the axle housing.
  6. Drain the axle lubricant into a suitable container.

Installation Procedure

  1. Inspect the rear axle cover gasket for nicks, cuts or damage that may cause the gasket to not seal properly. If any of these conditions exist, replace the gasket.
  2. If the gasket is to be reused, clean the rear axle housing cover gasket a suitable cleaner.
  3. Clean the rear axle housing cover gasket surface and the rear axle housing gasket surface with a suitable cleaner.

  4. Object Number: 341650  Size: SH
  5. Install the rear axle housing cover gasket and the rear axle housing cover (2).
  6. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  7. Install the rear axle housing cover bolts (1).
  8. Tighten

        • For the 8.0 inch axle, tighten the rear axle housing cover bolts in a crosswise pattern to 30 N·m (20 lb ft).
        • For the 8.6 inch axle, tighten the rear axle housing cover bolts in a crosswise pattern to 25 N·m (18 lb ft).
  9. Fill the rear axle with axle lubricant. Use the proper fluid. Refer to Front Axle Lubricant Replacement .
  10. Lower the vehicle.